Synthesized Signal Generator – SSG
-
So many jobs in the lab require a good quality synthesized RF signal generator used solely as a CW source. The SSG is designed to be a workhorse in the lab, providing a low phase noise synthesized CW output in a small package that is easy to move around, and without the penalty of paying for features you don’t need.
Applications
- A general purpose laboratory workhorse
- Frequency hopping CW LO for frequency converters
- Test source for device characterization
Advantages
- Low cost
- Small size and light weight
- Fast settling
-
- 10 MHz – 4000 MHz
- 40 dB power range
- Low phase noise CW output
- Automatic selection between internal or external 10 MHz reference
- Front panel, RS232, GPIB, and LAN controls
-
Frequency Range 10 MHz to 4000 MHz Frequency Resolution 10 Hz up to 1999.99999 MHz,
20 Hz for 2000-4000 MHzFrequency Accuracy +/-2 PPM internal reference or per external reference Frequency Update Rate 2 ms via LAN or GPIB Settling Time Standard:
200 usec typicalSpecial Purity Phase Noise:
at 1 GHz
-55 dBc @ 10 Hz
-81 dBc @ 100 Hz
-103 dBc @ 1kHz
-107 dBc @ 10 kHz
-108 dBc @ 100 kHz
-128 dBc @ 1 MHz
Spurious:
< -50 dBc
Output Noise Floor:
< -145 dBm/Hz
2nd Harmonic:
< -20 dBc
3rd Harmonic:
< -30 dBcOutput Power Power Range:
+10 dbm to -30 dBm
Power Resolution:
0.1 dB
Power Accuracy:
+/- 0.5 dB -20 to +10 dBm
+/- 0.75 dB @ <-20 dBmImpedance 50 ohms VSWR 2:1 maximum into 50 ohms External Reference 10 MHz sine, 0 dBm +/- 3dB Enviroment Operating Temp:
0º C to +35º C
Shock and Vibration:
MIL-PRF 28800F
Type III Class 4
EMI:
MIL-STD 461B RE02
Part 2 and CISPR IIControl and Interface Local Interface:
Front panel keypad and display
Remote Interface:
IEEE-488.2, LAN, RS-232Primary Power Voltage:
90-264 VAC autoranging
Frequency:
48-66 Hz
Consumption:
40 VA, maximum
Fuse:
1A, slow-blowPhysical Ambient operating temp:
0º to 35º C
Dimensions:
10″ W x 2.75″ H x 10″D